R4 LED Strobe for Integrators & Touring | DMX/RDM OEM/ODM

Touring advance teams and integration engineers need fixtures that behave predictably and document cleanly. The R4 led strobe light gives you one strobe light bar that acts like three—strobe, wash, pixel—so plots stay lean and handoffs are smooth. With 8+8 segments (16 zones), 1–30Hz range, and 32-bit dimming, you get a crisp strobe light effect and a rich rgb strobe light base that reads on camera. Choose 3/9/24-channel DMX via your preferred strobe light controller, use RDM for addressing at scale, and keep runs tidy with DMX/power in-out. Backed by a factory-direct manufacturer for bulk orders, customization, and OEM/ODM, R4 drops cleanly into CAD, rider notes, and commissioning checklists.

Profile flexibility (3/9/24-CH)
From quick corporate presets to pixel-accurate touring shows, the R4’s DMX personalities fit your surface and crew skill level:

• 3-CH: speed to show—intensity, color, strobe.
• 9-CH: nightly precision—color control, dimmer curves, strobe lighting behavior.
• 24-CH: per-zone pixel finesse across 16 segments.

Addressing at scale with RDM
Change modes, channels, and check personalities across high fixture counts without climbing the truss—ideal for festivals and ballrooms with tight resets.

Cable hygiene that survives load-ins
DMX in/out and power in/out keep truss runs lean, reduce home runs, and simplify universe splits—fewer failure points when time is tight.

CAD blocks that communicate intent
Label the 8+8 segments and pre-decide chase flow (L→R, R→L, center-out). It prevents interpretation drift when a guest LD loads a different showfile.

Power budget that passes review
Plan 240 W/fixture; annotate per-truss totals and breaker maps (110/220 V). Flag trusses sharing high-draw scenic so power techs can pad capacity.

Macro library that travels well
Deliver BUILD / DROP / BREAK / FILL pages with BPM notes and suggested rates (e.g., DROP: white at 18–22 Hz for 2–3 bars). Looks translate across consoles and keep intent intact.

Commissioning checklist

• Firmware version & date
• RDM addressing range per universe
• Universe map and patch notes (per truss)
• Safe-strobe notice (max burst guidance)
• Fallback: sound activated strobe light scene & Auto scene

IP20 indoor & semi-outdoor precautions
Add rain protection or canopy for semi-outdoor use. Post light-sensitivity notices near audience areas; avoid prolonged high-frequency strobe.

Camera hygiene
32-bit dimming helps reduce banding. Recommend 1/60–1/200 shutter and locked white balance when filming rgb strobe light looks.

Corporate ballroom (quick turnover)
6–8 units on the back truss; 9-CH profile; macros mapped to showfile buttons for consistent looks between panels, interviews, and awards.

Club tour package (pixel forward)
12–16 units across back truss & side posts; 24-CH for per-zone chases; front-lip row for tasteful white hits on drops. RDM templates speed daily patch.

Hybrid install (resident + visiting LDs)
Fixed 8-bar grid with 4 touring spares. Resident showfile in 9-CH; visiting LDs import a 24-CH pixel page. Universe splits live in the rack door.

Bulk orders & logistics
Tiered pricing, palletized packing, and predictable lead times; cartons can be labeled by DMX personality for easier warehouse kitting. See bulk orders & tiered pricing.

Customization / OEM/ODM
Logo plates, barcode/QR asset IDs, case-foam layouts, and preloaded showfile presets. Bundle an R4 strobe light kit (splitters, jumpers, safety) under one PO. Learn more: OEM/ODM customization.

Factory-direct manufacturer support
Batch QA reports, serialized logs for asset tracking, two-year warranty, and optional advance-replacement windows—ideal for touring where downtime is expensive. Meet our factory-direct manufacturer.

One multi-role bar acting as strobe, wash, and pixel reduces risk in integration, simplifies showfiles, and keeps touring handoffs clean. You carry less, patch faster, and keep the look the artist signed off on.

Use 9-CH to balance control and speed. It gives dependable color/dimmer/strobe lighting without per-zone overhead—works with any mainstream strobe light controller.

In CAD, label the 8+8 segments with arrows (L→R and center-out). Include a “Pixel Map” page so touring LDs align cues on load-in.

Keep bursts short and musical. Typical DROP hits are 18–22 Hz for 2–3 bars. Add a safe-strobe line to rider and venue policy.

Yes. RDM pushes personality and channel updates per universe; confirm from the desk—no ladder time.

Plan 240 W per fixture. Annotate per-truss totals and breaker maps (110/220 V). Use power in/out to daisy-chain within venue policies.

Yes—bulk orders, customization, and OEM/ODM with factory QC, serial logs, and documentation packs so integrators can ship with confidence.

Save a sound activated strobe light scene and an Auto scene to the fixture so the show stays musical while you troubleshoot FOH.