The X6 recessed disco ball light helps bars and lounges standardize looks with one device: an RGBW disco ball light, a 1–20 Hz strobe light, and red/green laser light. Mount as an embedded disco ball light in a recessed ceiling grid or deploy portable for quick swaps. Weeknights run on sound-activated party light autopilot; weekends lock into DMX512 DJ lights scenes for repeatable “open/mid/peak” energy. As a manufacturer with bulk pricing, OEM/ODM customization and factory support, we help venue groups cut SKUs, speed installs, and keep consistent club lights across rooms.
Three Effects, One Fixture
The X6 party light consolidates three common effects into one housing—disco ball light, strobe light and laser light—so you carry fewer SKUs, train staff on one interface, and execute faster resets between DJs.
- RGBW Disco Ball (movement without glare): Low-to-mid levels keep booths lively; color stays camera-clean.
- 1–20 Hz Strobe (impact on drops): Remote-trigger short bursts for peaks without overwhelming guests.
- Red/Green Laser (structure in haze): Crisp lines that shape the room; aim above eye level to avoid reflections.
Procurement win: one party light replaces three fixtures—fewer failure points, simpler spares.
Recessed Disco Ball Light: Ceiling Design & Zones
Build a clean grid with an embedded disco ball light in a recessed ceiling—it’s tidy, theft-resistant, and keeps club lights symmetry consistent across rooms.
- Cut-out: Ø≈ 200 mm
- Recessed depth: ≥ 180 mm
- Ventilation: Keep intake/exhaust paths open in the ceiling cavity.
Placement ideas: over dance clusters for animated movement; near booth seating for soft motion; along walkways for subtle direction and safety lighting.
DMX512 DJ Lights Strategy & Sound-Activated Routines
Weeknights (minimal staffing): Run sound-activated party light mode and give bartenders a remote control party light crib sheet: blackout at last call, strobe punch on playlist peaks, quick mode switches.
Weekends (programmed looks): Patch scenes via DMX512 DJ lights—Open (warm, slow movement), Mid (color chase with light strobe), Peak (tighter beams + strobe punches). Use master/slave to keep multiple X6 units uniform across zones.
Rollout Playbook & ROI
- Starter layouts: 4× X6 for 40–60 m² (grid corners); add 2 on the back bar or entry line for balance.
- Cost control & uptime: One device does three jobs—fewer SKUs, faster swaps, simpler training; typical draw below the 40 W max saves energy.
- Bulk & branding: Bulk pricing, OEM/ODM bezels/finishes, branded faceplates, venue-specific presets.
- Factory support: batch QC, burn-in, spare kits, documentation pack from the manufacturer.
How Many X6 Units for a 40–60 m² Bar?
Start with 4× X6 for a 40–60 m² room. Add 2× X6 to highlight the back bar or entry path for more even coverage and a stronger first impression. Larger lounges scale to 6–8 units across seating bays; add a pair for patio or queue lines.
Safety, Training & Maintenance
- Laser safety: keep beams above eye level; avoid mirrors and low angles; follow local guidelines for laser light use.
- Quarterly check: dust filters, tighten mounts, confirm AC95–245 V / 50 Hz power, test dimming and strobe light range.
- Spares & SLA: keep 1 spare per 8–10 units; define a weekend swap SLA to protect revenue.
- Staff routine: remote-controlled blackouts, last-call sequence, quick sanity check at shift start.
Specs at a Glance
- Operating Voltage: AC 95–245 V, 50 Hz
- Total Power: 40 W (15 W magical ball; 20 W strobe; 30 mW red + 30 mW green laser)
- LED Engine: 1×15 W OSRAM RGBW 4-in-1 (ball)
- Strobe LEDs: 2×10 W (1–20 Hz)
- Lasers: Red 30 mW + Green 30 mW
- Control: DMX512 (13 ch), Master/Slave, Auto, Sound-Activated, Remote
- Dimming: 0–100% ultra-smooth
- Recessed Cut-out: Ø≈200 mm; Depth: ≥180 mm
Explore more: Party Lights for Bars · DJ Lights Collection · X6 Product Page · Bulk Orders & OEM/ODM · Recessed Ceiling Cut-Out Guide · DMX512 Starter Showfile · Laser Light Safety Checklist
FAQ (Buying Guide for Venues)
How many units per room?
For 40–60 m², start with 4× X6. Add 2× X6 for the back bar or entry line to balance coverage.
Can we recess X6 and still use sound-active & remote?
Yes. The face remains exposed, so sound-activated and remote functions work normally with a recessed ceiling install.
Do you support bulk orders and customization?
Yes—bulk pricing, OEM/ODM customization (bezels, trims, branding), factory packaging kits, and consolidated shipping windows.
Lead time and spares strategy?
We schedule by batch. Keep 1 spare per 8–10 units; define a weekend swap SLA to protect events.
How do we integrate with our DMX showfile?
Patch X6 as DMX512 (13 ch). Save three global scenes (Open/Mid/Peak). Use master/slave for uniform looks across zones.
Safety & compliance for lasers?
Keep beams above eye level, avoid reflective surfaces, ventilate recesses, and follow local laser light guidelines.
Pros & Considerations
- Pros: 3-in-1 effects; recessed or portable; sound-activated party light; remote control party light cues; global voltage; DMX512 DJ lights ready.
- Considerations: keep lasers above eye level; plan Ø≈200 mm cut-out & ≥180 mm depth; stock 1 spare per 8–10 units.
CTA — Spec the Smart Default
Standardize on the X6 recessed disco ball light to cut SKUs without cutting vibe. Ask about bulk schedules, OEM/ODM branding, and factory-direct spares.