Elevate weddings and KTV rooms with the X6 disco ball light—a compact party light that layers soft motion, crisp laser light, and a tasteful 20Hz strobe light for camera-ready moments. Staff can run sound-activated party light mode for instant energy, or save repeatable cues via DMX512 DJ lights. Recessed in the ceiling for a clean, built-in feel or used as a portable laser light projector, the X6 sets up fast and fits real-world timelines. Enjoy free shipping, a two-year warranty, and small-batch orders if you’re outfitting multiple rooms.
Table of Contents
| Section | Jump |
|---|---|
| Why One Fixture Beats a Pile of Gear | Go |
| Recessed Ceiling Elegance vs. Portable Speed | Go |
| Sound-Activated Scenes for Guests | Go |
| DMX512 for Repeatable Moments | Go |
| Safety & Setup Checklist | Go |
| What to Buy (Kits & Accessories) | Go |
| Specs at a Glance | Go |
| FAQs (collapsible) | Go |
| CTA — Say “I Do” to Easy Light | Go |
Why One Fixture Beats a Pile of Gear
Three layers, one fixture
The X6 combines three crowd-pleasing effects in a single party light:
- Disco ball light — gentle rotating dots for walk-ins, cocktails, and table photos.
- Strobe light — brief 20Hz bursts that freeze confetti and bouquet tosses.
- Laser light — slim, defined beams that sketch clean geometry over light haze.
Cinematic results with less setup
Designed as a compact laser light projector, the X6 gives consistent looks across rooms and events. Teams learn menus in minutes and reuse the same few scenes night after night—smooth timelines, better photos.
Recessed Ceiling Elegance vs. Portable Speed
Recessed: the built-in KTV & banquet look
Keep the room clean and modern. Plan a cut-out around Ø≈200 mm and a depth ≥180 mm with airflow around the housing. The recessed finish hides hardware while the disco lights-style glow fills the room.
Best for: KTV suites, banquet halls, clubs with minimalist ceilings.
Best for: KTV suites, banquet halls, clubs with minimalist ceilings.
Portable: weddings-on-the-go
Mount the X6 on a stand. Keep a remote control party light handset and spare batteries for instant cues during speeches and dances.
Best for: mobile DJs, wedding planners, multi-use spaces.
Best for: mobile DJs, wedding planners, multi-use spaces.
| Install | Cut-out / Depth | Setup Time | Best Use |
|---|---|---|---|
| Recessed | Ø≈200 mm / ≥180 mm | Planned install | KTV rooms, banquet venues |
| Portable | — | 5–10 minutes | Mobile weddings, multi-use rooms |
Sound-Activated Scenes for Guests
Let the music drive the show
Switch to sound-activated party light mode and let the kick guide motion—perfect while you MC or manage the floor.
Wedding moments that pop
Start soft for processional and first dance; tap a quick 20Hz strobe light accent for bouquet tosses; let laser light breathe over light haze for a premium “club” feel—sleek, not blinding.
DMX512 for Repeatable Moments
Program once, replay forever
Tie the X6 into your DMX512 DJ lights controller and save a simple timeline:
- Scene 1: Entrance — low intensity, gentle rotation.
- Scene 2: Toasts — subtle beams, no strobe.
- Scene 3: Dance — higher dimming, occasional strobe, stronger rotation.
Safety & Setup Checklist
- Aim above eye height—especially for laser light output.
- Ventilation—leave airflow around recessed housings; keep vents clear on portable rigs.
- Cable hygiene—tape run-outs and avoid trip hazards near head tables and doors.
- Start soft—begin at low 0–100% dimming levels for dinners and speeches.
- Coverage guide—one X6 covers 15–25 m²; use 2–4 units for medium ballrooms or multi-zone coverage.
- Strobe etiquette—use 20Hz in short bursts only at big moments.
What to Buy (Kits & Accessories)
KTV Recessed Kit
X6 fixture • Ventilated ceiling can/grille • Optional DMX wall plate (integrates with house DJ lights).
Wedding Portable Kit
X6 fixture + tripod stand • Remote control party light handset + spare batteries • Short DMX cable (optional).
Nice-to-Haves
Light haze for 3D beams • Soft/road case • Safety cable • Gaffer tape.
Specs at a Glance
Effects: disco ball light motion, laser light beams, 20Hz strobe light | Control: sound-activated party light, DMX512 DJ lights, manual/remote | Install: recessed ceiling (Ø≈200 mm, depth ≥180 mm) or portable stand-mount | Use case: wedding halls, KTV rooms, lounges, small clubs | Comfort: smooth 0–100% dimming from ambience to party.
FAQs
Recessed or portable — which should I choose?
Fixed KTV rooms and banquet halls look cleaner with recessed installs. If you switch venues often, go portable—the X6 mounts fast and travels light.
Will it be too bright for dinners or toasts?
No. Begin at low 0–100% dimming levels and increase after speeches. The X6 is elegant first, energetic later.
Do I need haze to see laser light on camera?
Not required. A light puff enhances depth, but the starry motion still reads clean without haze.
Can it sync with my DJ controller?
Yes. The X6 integrates with DMX512 DJ lights. Save entrance/toast/dance scenes; master/slave keeps multiple units in sync.
How many party lights do I need?
One X6 covers 15–25 m². For medium rooms or even coverage across a long dance floor, use 2–4 units.
Shipping, warranty, and small orders?
Enjoy free shipping, a two-year warranty, and small-batch orders if you’re upgrading multiple rooms over time.
Say “I Do” to Easy Light
Bring X6 party lights to your next wedding or KTV room—elegant when recessed, effortless when portable. Enjoy free shipping, a two-year warranty, and small-batch orders for multi-room rollouts.
Helpful reads: Wedding party lights • KTV lights • DMX512 DJ lights presets • How to film a laser light show