One Fixture, Four Holidays — Starshine X8 Laser Light Projector
The Starshine X8 laser light projector turns one room into a rotating holiday stage—from spooky Halloween haze to a New Year’s countdown—without bulky gear. X8 hides in your embedded ceiling with a clean flush-mount finish, then delivers club-style party lights: RGBW butterfly beams, a crisp 20W strobe, and classic red/green dots for a photogenic laser light show. Run hands-free in Sound Active or cue precise moments with DMX512. Eligible Starshine orders include free shipping, a two-year warranty, and we support small-batch orders so you can start with one fixture and scale later.
The Starshine X8 laser light projector turns one room into a rotating holiday stage—from spooky Halloween haze to a New Year’s countdown—without bulky gear. X8 hides in your embedded ceiling with a clean flush-mount finish, then delivers club-style party lights: RGBW butterfly beams, a crisp 20W strobe, and classic red/green dots for a photogenic laser light show. Run hands-free in Sound Active or cue precise moments with DMX512. Eligible Starshine orders include free shipping, a two-year warranty, and we support small-batch orders so you can start with one fixture and scale later.
Why a Flush-Mount Laser Light Projector Wins the Holidays
Always ready, zero clutter. X8 lives in the ceiling—no tripods or floor gear—so your lounge or dining room stays guest-friendly.
Photo-friendly beams. RGBW fans read beautifully on camera; with light haze your feed looks pro.
From cozy to countdown. One fixture glides from warm dinners to midnight drops with a quick preset change.
Key Holiday Presets at a Glance
- Halloween: Slow green-forward RGBW butterfly fans, low-intensity red/green dots, minimal strobe.
- Friendsgiving & Christmas: Warm RGB mixes, gentle 20W strobe pulses, subtle festive dots.
- New Year’s Eve: Sound Active early; at 00:00 go full-width fans + brief white strobe hits (use DMX512 for perfect timing).
Halloween — Eerie Beams & Slow Chases
Lean into the mood with green-forward mixes and slow RGBW butterfly fans. Keep red/green laser dots on low intensity so they crawl across walls and ceilings. Use light haze to sharpen edges; save strobe for tiny pulses so the tension simmers, not explodes.
Quick Recipe (No Console)
- Mode: Sound Active (sensitivity low)
- Color bias: Green + cool blue
- Strobe: Off or short 1/16 taps on big hits
- Tip: Angle beams away from windows for neighbors
Friendsgiving & Christmas — Warm Wash + Sparkle
Shift to amber/rose/soft white RGB mixes; keep the 20W strobe in gentle rhythms. Bring up red/green laser dots for festive sparkle, then lower them during conversation. With Sound Active, X8 tracks your playlist so you can actually host comfortable, camera-ready party lights.
Quick Recipe (Hands-Free)
- Mode: Auto or Sound Active (medium)
- Color bias: Warm RGBW, low saturation
- Strobe: Short pulses on chorus only
- Tip: Very light haze for depth without foggy photos
New Year’s Eve — Countdown Moments
Let Sound Active carry the room early in the night, then switch to manual cues for midnight. On the final minute, widen butterfly fans, set white accents, and arm the strobe for brief hits at each countdown beat. For perfect timing, map looks via DMX512—true DJ lights control in a living room.
Quick Recipe (Manual / DMX512)
- Pre-midnight: Sound Active, medium sensitivity
- 00:00: Full-width fans + brief white strobe pops
- After: Pull strobe back; keep beams wide for dancing
Neighbor-Friendly Tips
- Aim smart: Angle beams toward interior walls; use curtains after 10 pm.
- Strobe comfort: Keep duty cycles short; avoid eye-level hits.
- Sound, not noise: Pair X8 with a small sub to keep bass rich at modest volume.
Fast Setup for the Season
- Cutout & depth: Ø20 cm opening with ≥18 cm cavity; allow airflow.
- One-room layouts: One X8 (3–6 m throw); two X8 in Master-Slave (6–10 m); four-unit grid for ceiling chases.
- Save scenes: Halloween / Dinner / Countdown—three buttons you’ll reuse all year.
Buying Guide — What You Get with Starshine
What’s in the Box
X8 fixture, mounting hardware, power cable, quick start—everything you need to get light on the ceiling fast.
Free Shipping & Two-Year Warranty
Eligible orders ship with free shipping, and every X8 is backed by a two-year warranty from Starshine.
Try First, Scale Later
We support small-batch orders—start with one X8, then expand to a ceiling grid when you’re ready.
Explore more Starshine laser light projectors · Shop party lights · Learn laser safety tips · See shipping & warranty.
X8 Key Specs
- Type: flush-mount laser light projector for embedded ceiling
- Effects: 2×10W RGBW butterfly, 20W white strobe, red/green laser dots
- Modes: Auto, Sound Active, Master-Slave, DMX512
- Install: Cutout Ø20 cm; cavity ≥18 cm · Best throw 3–10 m
FAQ (Collapsible)
Do I need DMX512 to run a holiday show with the X8?
No. Sound Active and Auto create a complete laser light show. Use DMX512 only if you want precise countdown cues and stored scenes.
How many X8 units do I need for a 6–10 m room?
Typically two in Master-Slave for mirrored sweeps. Add light haze for crisp beams and keep strobe to short bursts for comfort.
Will the X8 fit my ceiling cutout and depth?
Yes—cut Ø20 cm and reserve ≥18 cm cavity depth, leaving ventilation space around the chassis.
How do I keep the strobe neighbor-friendly at night?
Use short duty cycles, mount above eye level, angle beams inward, and close curtains after 10 pm.
Can I start with one unit and expand later?
Absolutely. Starshine supports small-batch orders—try one, then grow your ceiling grid later.
Is there free shipping and warranty?
Yes—eligible orders include free shipping, and the X8 comes with a two-year warranty from Starshine.
Make Every Holiday a Show
Get the Starshine X8 Embedded Laser Light Projector—free shipping, two-year warranty, small-batch orders welcome.
Or browse all laser light projectors and DJ lights.