M20 5W/10W RGB Moving Head Laser Light with LED Halo for Bars Clubs Stage
Regular price
$1,300.00
Sale price
$1,300.00
Regular price
Unit price
Overview
M20 5W/10W RGB Moving Head Laser Light with LED Halo for Bars Clubs Stage
M20 Moving Head Laser Light for Immersive Bar & Club Shows
The Starshinelights M20 5W/10W RGB moving head laser light is built for bars, clubs and compact stages that want a real laser show, not just simple moving lights. Sharp RGB beams cut through haze to form huge triangles, fans and “light walls” in the air—very similar to the laser looks in your reference photos. A few fixtures can turn any dance floor into an immersive environment where every drop, build and breakdown is framed by moving head lights that move with the music. For bar halls, DJ booths and small touring rigs, M20 is a compact workhorse you can trust night after night.
5W / 10W RGB moving head laser light with tight beams for bars and clubs
31× RGBW LED halo ring around the aperture for unique halo and chase effects
Pro galvo system for clean aerial graphics and simple logos
Multiple control modes: auto, sound-active, DMX, master–slave, ILDA and SD card shows
Compact beam moving head light housing with 540° pan and 270° tilt
Designed to integrate with other dj moving head lights and LED effects
5W / 10W RGB Diode Engine with LED Halo Ring
Inside the M20 is an imported pure-diode RGB laser engine for high stability and long service life. You can choose between a 5W and a 10W full color version:
5W version: Red 1.5W @ 638 nm, Green 1.5W @ 520 nm, Blue 2W @ 445 nm
10W version: Red 3W @ 638 nm, Green 3W @ 520 nm, Blue 4W @ 445 nm
Even in busy rooms, the 10W model has enough punch to drive the main room, while the 5W is perfect for side zones and smaller venues. Around the laser aperture, a ring of 31 RGBW LEDs creates a bright halo that can run chase, strobe and breathing effects.
This halo ring makes M20 stand out from regular moving head lights or basic beam light fixtures: you get tight laser beams plus a vivid LED ring in one compact led moving head light. The combination looks especially strong on truss grids and center clusters, where the halo outlines the head while the laser beams cut across the room.
Pro Galvo Scanning for Real Laser Lighting & DMX Control
M20 uses a DT30K-level galvanometer scanning system with graphics speeds up to 30 kpps and a ±30° (60° total) scan angle. It can draw clean aerial shapes, tunnels, cones and simple text or logos, giving you a real laser light show rather than just straight beams.
For control, M20 grows with you from plug-and-play to full programming:
Auto & sound-active modes for quick party setups – just add haze and go
28-channel DMX mode for complete control from your lighting console, alongside other moving head stage lights
Master–slave linking to mirror looks across multiple fixtures
ILDA 25-pin input for advanced programming with Pangolin FB3 / FB4 and other professional moving head laser controllers
Rear SD card slot preloaded with 128+ beam and animation shows, with room for your own content
Whether you want a simple mini led spot moving head light to run on auto in a small bar, or a line of professional moving head lights fully synced to music on a show, M20 fits smoothly into your laser lighting rig.
Cooling, Protection and Safety for Long Moving Head Shows
The M20 moving head laser light is engineered to survive long nights and repeated events. The internal design includes:
Power-off protection and a sealed, dust-resistant, moisture-resistant, anti-corrosion housing
High-efficiency cooling system covering about 50% of the chassis area
Built-in temperature control that automatically adjusts fan speed
The fixture operates stably from -40°C to 45°C, ideal for busy indoor club environments. Safety features include a key switch, delayed laser output at startup, scanning-failure protection and a stable high-level control system. With an IP33 rating, M20 is a great fit for indoor installations in bars, KTV rooms and entertainment spaces, or under cover in semi-outdoor venues when properly protected.
Compact Moving Head Stage Light for Easy Rigging
With 540° pan and 270° tilt under 16-bit resolution, the M20 can sweep beams across the room, build symmetric triangles and create overhead “laser umbrella” effects. The compact housing (approx. 30 × 23 × 47 cm, net weight around 11 kg) makes it easy for one person to rig on truss, T-bars or ground bases.
Use four units to fill a small dance floor with beams, or six to eight fixtures in a bar hall to create a dense rain of moving head stage lights and led moving lights. For rental and touring, the size and weight make transport fast while still looking like a high-end moving head dj lights rig on stage.
Specs
Model
M20
Type
RGB animation moving head laser light with LED halo ring
Versions
5W and 10W full color
Laser Source
Pure diode laser modules (NICHA)
5W version
Red: 1.5W @ 638 nm + Green: 1.5W @ 520 nm + Blue: 2W @ 445 nm
10W version:
Red: 3W @ 638 nm + Green: 3W @ 520 nm + Blue: 4W @ 445 nm
LED Halo Ring
31 × RGBW LEDs around the laser aperture
Effects
halo, chase, running patterns, strobe, color fades
Graphics scanning speed
up to 30 kpps (DT30K-level galvos)
Scanning angle
±30° (60° total)
Laser divergence
< 1.6 mrad (full angle)
Laser spot size
≤ 6.5 mm at output window
5W version
Red: 1.5W @ 638 nm + Green: 1.5W @ 520 nm + Blue: 2W @ 445 nm
Pan / Tilt
Pan: 540°, 16-bit resolution / Tilt: 270°, 16-bit resolution
DMX channels
28 CH
Control modes
Auto run, sound-active, DMX512, master–slave, ILDA, SD card playback
External control
ILDA 25-pin input, compatible with Pangolin FB3 / FB4 and other ILDA controllers
SD card
Factory-loaded with 128+ beam and animation shows; supports user-imported patterns, lines and text
Auto on/off
Simple automatic power on / off timing function
Input voltage
AC 90–250V, 50/60 Hz (global range)
Max power consumption:
≤120 W (5W version)
≤150 W (10W version)
Operating temperature
-40°C to 45°C
Protection rating
IP33
Dimensions & Weight
Product size: approx. 30 × 23 × 47 cm
Net weight: approx. 11 kg
Single carton: 51 × 39 × 37 cm
Gross weight: approx. 15 kg
Recommended Applications
Bars and clubs
KTV rooms and entertainment bars
Small to mid-size stages and dance halls
Hotel ballrooms and banquet halls
Touring and rental rigs with other moving head lights and dj lights
Package Contents
1 × M20 5W/10W RGB moving head laser light with LED halo ring
1 × Power cable
Single carton: 51 × 39 × 37 cm
1 × User manual
FAQ
Q: Should I choose the 5W or 10W version of the M20?
A:The 5W version is ideal for small bars, KTV rooms and low-ceiling spaces. The 10W version is better for main dance floors, larger club rooms and stages where you need brighter moving head laser light to punch through haze and other lighting.
Q: Do I need haze or fog to see the beams clearly?
A:For simple logo or wall projection you can run M20 without haze. To get the 3D triangles and “laser curtain” looks from the photos, we strongly recommend using a hazer or fog machine—this makes every beam from your beam moving head light much more visible and immersive.
Q: Can I use M20 outdoors?
A:M20 is rated IP33, designed mainly as an indoor stage and party fixture. For outdoor shows, use it under a roof or in a proper weatherproof enclosure, or choose a dedicated IP65 outdoor laser model from Starshinelights.
Q: What control options are available for beginners and advanced users?
A:Beginners can plug in and run auto or sound-active modes like regular dj moving head lights. Advanced users can control all 28 DMX channels from a lighting console, link multiple fixtures in master–slave mode, or use the ILDA port with Pangolin FB3 / FB4 for fully programmed laser lighting synced to music.
Q: Can I upload my own logos, text or animations?
A:Yes. The rear SD card comes with more than 128 pre-programmed beam and animation shows. You can create your own ILDA frames and shows with compatible software, then load them to the SD card or play them live through Pangolin and other ILDA controllers./div>
Q: How safe is the M20 for audience environments?
A:M20 includes a key switch, delayed laser output at startup, scanning-failure protection and intelligent thermal management. When mounted correctly and used under local laser safety regulations, these features help reduce risk during shows.
Q: How many M20 fixtures do I need for a typical bar or club room?
A:For a 150–250 m² main room, we recommend 4 units as a starting point—two on the front truss and two on the rear or side truss. For a denser look with criss-crossing beams over the crowd, upgrade to 6–8 units spread around the dance floor or center island with your other moving head lights.
Review