Who Is This For?
- Cultural/tourism districts & destination venues needing dynamic wayfinding at night and seasonal “skins”.
- Mixed-use & retail complexes seeking consistent architectural wall wash lighting with tasteful motion for events.
- Lighting integrators & property teams who want reliable wall washing lights plus pixel effects backed by factory documentation and spares.
Why a Pixel-Addressable Wall Washer?
420 W Output + Dense Aperture
Delivers a stable, uniform base across wide facades so materials and signage stay legible.
140-CH Pixel Mapping
Create festive skins, hourly cues, and dynamic wayfinding bands that flow toward entries or along pedestrian routes.
IP65 + Wide Temperature
Rated −30 to 50 °C, the N5 is a true outdoor wall washer light for four-season operation.
DMX512 + RDM
Use it as a DMX wall washer; RDM speeds addressing, status checks, and maintenance logs—especially on high or remote mounts.
Quick Answers (for Featured Snippets)
What is a pixel-addressable LED wall washer for facades?
A pixel-addressable LED wall washer provides uniform wall wash lighting for daily identity and adds 140-CH motion for dynamic wayfinding and festive skins on demand.
How many fixtures do I need for 40–60 m facades?
Use units = ceil(width / spacing) with 3–5 m spacing. A 60 m facade at 4 m spacing needs ≈15 units, tightened around folds or columns.
Three-Layer Facade Method (Design Once, Schedule Forever)
1) Base Layer (Everyday Identity)
Run 20–50% on 16-bit dimming for clean LED wall wash lighting. Goal: readable, premium base without glare.
2) Wayfinding Layer (Slow Directional Motion)
Add a slow pixel wave moving toward the entrance or desired flow. Keep speeds restrained so guidance reads subconsciously.
3) Festive Layer (Time-boxed Accents)
During specific windows, layer in 1–6 Hz pulses or soft strobes to signal holidays or hourly chimes. Return to Base Layer immediately.
| Layer | Dimming | Motion | Strobe | Schedule |
|---|---|---|---|---|
| Base (Identity) | 20–50% (16-bit) | None | Off | Dusk → Midnight |
| Wayfinding | 25–45% | Slow wave toward entry/flow | Off | Evening peaks |
| Festive | 30–50% base | Subtle wave | 1–6 Hz (short) | Event windows / hourly |
Engineering Deployment Guidelines (Spec-Friendly)
- Spacing: start at 3–5 m C-to-C. Tighten around folds, columns, and signage nodes.
- Circuits (experience values): 220–240 V ≈ 1.8–2.0 A per unit ・ 100–120 V ≈ 3.5–4.2 A per unit; plan breakers at 70–80%.
- Cabling & weather: split power/DMX, use weather-rated connectors, drip loops, and port shields; daisy-chain power/DMX in/out to minimize home runs.
- Maintenance: seasonal inspections of brackets/glands/seals; use RDM to pull status and runtime into a ledger.
Safety & Compliance
- Ingress protection: IP65 enclosure and connectors for permanent outdoor duty.
- Mechanical reliability: metal housing, secure brackets, anti-vibration practice.
- Electrical protection: local code for GFCI/RCD, bonding/earthing, surge protection; respect zoning/curfews.
Sizing & Power Planner
Units: ceil(width / spacing) with spacing 3–5 m depending on uniformity and pixel legibility.
| Facade width | Spacing (m) | Units (ceil) | Voltage | Amps / unit | Circuit note |
|---|---|---|---|---|---|
| 30–40 m retail front | 3–4 | 10–13 | 220–240 V | ~1.8–2.0 | ≤7–8 units on 16 A |
| 50–60 m plaza edge | 4–5 | 12–15 | 100–120 V | ~3.5–4.2 | ≤3–4 units on 15 A |
| 80 m cultural facade | 4 | 20 | 220–240 V | ~1.8–2.0 | Split zones; leave 20–30% margin |
Procurement & Delivery (B2B You Can Plan Around)
- Batch programs: tiered pricing for multi-phase rollouts and regional depots.
- OEM/ODM customization: housing color, logo plate, connector standards, DMX personality charts, road-case and crate specs.
- Manufacturer/factory support: QC checkpoints, photometrics, export paperwork, and production lead-time scheduling aligned with tenders.
- Spares & warranty: two-year warranty; recommended spares list (tails, glands, brackets) to keep SLAs intact.
FAQ (Collapsible)
What makes the N5 different from a traditional wash bar?
How many fixtures for a 40–60 m facade?
units = ceil(width / spacing). For 60 m at 4 m, plan ≈15, tightening around folds/columns.Will it integrate with our existing control backbone?
Is it robust enough for year-round outdoor use?
How do we log maintenance and uptime?
Do you support batch, customization, and factory documents?
Request the Facade Engineering Sheet
The N5 LED wall washer is both a stable base-light source and a programmable canvas for dynamic wayfinding and festive skins. Send your facade width and an elevation drawing—we’ll return a spacing / circuit / show-window schedule you can drop into a bid or kickoff pack. Batch pricing, OEM/ODM, and manufacturer scheduling available.