A14 2W RGB Party Laser Lights | 21CH DMX Laser Light Projector
Regular price
$280.00
Sale price
$280.00
Regular price
Unit price
Overview
A14 2W RGB Party Laser Lights | 21CH DMX Laser Light Projector
2W RGB Output for Real Party Laser Power
The A14 2W RGB party laser is built to light up bars, KTV rooms, small stages and house parties with big-show energy. With 500 mW of red, 500 mW of green and 1000 mW of blue laser power, the beams cut cleanly through haze and smoke for sharp, vivid lines. Whether you are running a compact DJ rig, adding party laser lights to a bar, or building indoor rave lights for a small venue, this laser light machine delivers enough punch to hold the whole room’s attention.
Because the A14 is a true RGB laser light, it can create bold aerial beams, fans and tunnel looks that feel very different from ordinary LED effects. It’s an easy way to upgrade basic lighting into a real laser stage lighting setup.
300+ Built-In Laser Patterns – Instant Laser Show Out of the Box
Inside the housing are over one hundred pre-programmed laser patterns and animations, including tunnels, grids, waves, geometric shapes and more. You don’t need extra software or pattern discs to get a full laser light show. Power it on, choose an internal program and you’re ready to go.
For rental companies, mobile DJs and venues that need fast setup, the built-in library makes it easy to create a rave light show or home laser shows without any programming experience. Because all the programs are stored inside the A14 2W RGB laser light, you can treat it as a plug-and-play effect for last-minute parties, or use those same patterns as building blocks in DMX shows later.
21-Channel DMX Control and Master-Slave Linking
With 21 DMX channels on board, the A14 party laser gives you fine control over patterns, movement, dimming, rotation direction, speed and strobe. It supports DMX, master-slave, auto run and sound active modes, so it can fit into anything from a basic party laser setup to a full programmed rig.
Multiple units can be linked together via DMX or set in master-slave mode to run in perfect sync, turning a single effect into a wall of laser party lights that look like a professional laser projector party on stage. When you hang several A14 party laser lights across a truss, you can create symmetrical chases, mirrored tunnel effects and wide aerial looks that feel much bigger than the size of each individual fixture
Sound Activated Laser Lights That Dance to the Beat
In sound active mode, the built-in microphone listens to the music and triggers different scenes based on the beat and intensity. Kicks, snares and build-ups all drive the laser’s motion and strobe, so your sound activated laser lights literally “dance” with the track.
This is ideal for small clubs, KTV rooms, live bands and anyone who wants disco laser lights or lasers for music without a dedicated lighting operator. Just set the A14 to sound mode, add a bit of haze and let the beams move in time with every drop. For home users, it turns a simple speaker system into a full home laser lighting and home rave experience.
Compact, Road-Ready Design for Gigs and Home Use
The wide-range AC100–240V, 50/60Hz power input makes the A14 2W RGB party laser compatible with most regions around the world. A single unit weighs only about 1.7 kg, with a compact inner box size of 27.5 × 21 × 18.5 cm, so it’s easy to carry, mount and reposition.
For installers and touring crews, the outer carton packs four units (45 × 29.5 × 40.5 cm, net 6.8 kg, gross 9.6 kg), keeping logistics and storage simple. Whether you use it as laser lights for party in a living room, a strobe light for house party setups, or part of a professional club rig, this small laser light machine is built for real-world gigging.
If you already own LED pars, moving heads or other home laser lights, adding one or two A14 laser party lights is a cost-effective way to bring true aerial laser beams into your lighting rig.
Specs
Model
A14 2W RGB Party Laser Light
Total Power
2W
Laser Power
Red (R): 500 mW
Green (G): 500 mW
Blue (B): 1000 mW
Scanner System
15Kpps high-speed galvanometer scanner
Control mode
DMX512, self-propelled, random
DMX Channels
21 channels
Control Modes
DMX / Master-Slave / Auto run / Sound active
Voltage
AC100–240V, 50/60Hz
Control Modes
DMX / Master-Slave / Auto run / Sound active
Inner Box Size
27.5 × 21 × 18.5 cm (1 pc)
Outer Carton Size
45 × 29.5 × 40.5 cm (4 pcs)
Single Unit Weight
Net 1.7 kg, Gross 2.2 kg
Outer Carton Size
45 × 29.5 × 40.5 cm (4 pcs)
Built-In Effects
300+ laser patterns and animations
Linking
Supports DMX daisy-chain and master-slave sync
Recommended Uses
Bars, clubs, KTV, small stages, weddings, laser lights for party, home laser shows and DJ sets
FAQ
Q: What size room is the A14 2W RGB party laser best for?
A:One A14 party laser light works well in spaces around 200–650 sq ft (20–60 m²), such as bedrooms, home party rooms, KTV boxes or small dance floors. For larger bars or club main rooms, you can use 2–4 units and link them together to create a more immersive laser light show and full-room laser stage lighting.
Q: Do I need extra software to use the built-in laser effects on the A14?
A:No. The A14 fixture has 100+ internal patterns and animations, so you don’t need additional software or pattern discs. Just select auto or sound active mode and the laser will cycle through its built-in programs. This makes it ideal for users who want laser lights for party and home laser shows without any programming.
Q: How do I link multiple A14 units for a synchronized party laser setup?
A:You can connect multiple A14 units with DMX cables. For full control, use a DMX controller and address each fixture as needed. If you don’t have a controller, you can set one A14 as the master and others as slaves in master-slave mode. They will then run the same patterns in sync, creating a wall of party laser lights or rave laser lights across the room.
Q: How good is the A14 sound active mode for music-driven shows?
A:The sound active mode is tuned for real-world party music. The built-in microphone listens to the beat and triggers different movements, strobe bursts and pattern changes. It’s perfect for small bars, live bands, DJs and home raves that want sound activated laser lights and disco laser lights without a dedicated lighting operator.
Q: Is the A14 fixture easy to install and transport?
A:Yes. At about 1.7 kg per unit with a compact housing, the A14 2W RGB party laser is very easy to mount on truss, T-bars or brackets, or simply place on a flat surface. The packaging (1 pc inner box, 4 pcs outer carton) keeps transport simple for rentals and touring. It’s a great choice if you need a portable laser light machine for both professional gigs and home laser lighting.
Review