N4 DMX IP65 RGBW Wall Washer 200W for Outdoor Facades

I originally compared these with basic flood lights and I'm glad I went with wall washers instead. The wall coverage is much cleaner and less patchy, especially on textured surfaces. It gives a more finished architectural look.

Installed a pair on a storefront and they made the facade look much more premium at night. The white channel gives a crisp look when we don't want colorful effects, and the RGB side is nice for holiday promos. Not much to complain about besides wishing the brackets had a little more adjustment range.

Bought this for church stage lighting and it gave us a much cleaner background than our old pars. Colors are even, and the dedicated white is useful for more subtle scenes. The housing is a little heavier than tiny indoor bars, but that also makes it feel more durable.

We needed an outdoor wall washer light for a patio backdrop and this one did the job well. The IP65 housing feels solid and it handled light rain without any issue. I do wish the first setup sheet were a bit more detailed, but performance has been reliable.

The light output is strong, but like any wall washer, placement really matters. Once we adjusted distance and tilt, the wall looked great. I wouldn't call that a flaw, just something buyers should understand before installation.

We used this on a small touring setup for stage wash lighting and it held up well. The brightness and color consistency were both good across multiple nights. Would have liked the menu labels to be a touch more beginner-friendly, but after the first setup it was quick.

Ordered 6 pieces to redo a venue wall and stage background at the same time. The fixtures synced well in master/slave first, then we moved them onto DMX once programming was ready. The result looked much cleaner than our old combination of pars and floods.

Had these outdoors for an event weekend with some off-and-on drizzle and no problems. That was the main reason I ordered this model in the first place. Build quality feels a step above bargain indoor bars.

The color transitions are smoother than some cheaper wash bars we used before. Reds and blues are strong, and the white channel helps a lot when we want a cleaner look for corporate events. Not silent if you're standing right next to it during setup, but once the event starts nobody notices.

We purchased 4 units for a small facade project and all four matched well in color and output. That was important because mixed batches can sometimes look slightly different. Shipping cartons were fine, though one mounting screw bag was packed separately and easy to miss.

Installed one on a small hotel exterior wall as a test unit and it was brighter than I expected. The RGBW mixing looks clean, especially when using white for simple architectural washes instead of saturated colors all night. Setup took a little menu checking at first, but once addressed in DMX it ran smoothly.

We used two units behind a wedding backdrop and the soft fades looked great in photos. The fixture is bright enough to color the wall without making the whole room feel harsh. My only small complaint is that I had to spend a little time dialing the best beam angle for the throw distance.

For an RGBW outdoor bar, I think this is a strong value. You get waterproof housing, decent output, smooth dimming, and DMX flexibility in one fixture. It is not a toy, so be ready for a more pro-style setup process.

After using this on both an outdoor event wall and an indoor stage backdrop, I'd buy it again. It has enough brightness for real work, good color mixing, and practical DMX options without feeling overly complicated. A slightly better quick-start sheet would make the first hour easier, but overall it's a very good fixture.

Used these on a DMX rig for a stage backdrop and they responded correctly after addressing. The 9/23/72CH options are useful depending on how deep you want to go with programming. The menu is not hard, but it is definitely easier if you've used DMX fixtures before.

We bought several 1m bars for a long wall and they line up very neatly. That made the facade lighting look much more continuous compared with using mixed fixture sizes. The body is slim enough to hide well, which I appreciated.

The pixel-style movement is a nice bonus when you want more than a static wall wash. We used chase effects for a DJ set and then switched to slower color movement for the rest of the night. It gives one fixture more range of use.

I used it as a stage light bar for a band setup and it covered the backdrop nicely. The color looked richer than our older wash lights, and the fade timing was consistent. It took me a minute to remember the addressing procedure, but after that it was straightforward.

Mounted this on a commercial exterior wall and the wash was impressively even. It does what a wall washer should do without the random hotspots we got from flood fixtures. Beam choice matters a lot, so plan that part carefully.

A lot of RGB fixtures look weak when you switch to white, but this one is actually usable for clean white washes. We used it for a church stage background and it looked balanced on camera. The dimming was smooth enough for slow transitions.